|
| 
 enlarge | Brand: Alden
Category: Home Improvement
List Price: $29.99
Buy New: $19.20
You Save: $10.79 (36%)
New (11) from $19.20
Rating:  31 reviews
Sales Rank: 23
Media: Tools & Hardware
Shipping Weight (lbs): 1
Dimensions (in): 7.6 x 3.7 x 0.9
MPN: ALD8440P
Model: 8440P
UPC: 727708084407
EAN: 0727708084407
ASIN: B001A4CWHO
Availability: Usually ships in 1-2 business days
|
| Customer Reviews:
 NONEXISTANT October 10, 2008
0 out of 6 found this review helpful
The extractor set has not arrived. I called to report a money clip was shipped but not the extractor set. She said it would go out right away?
Did not work as advertised October 9, 2008
Purchased this for my father who was planning to dis-assemble a wooden deck held together with phillips head wood screws. The Alden Grabit Broken Bolt and Damaged Screw Exractors would not remove the phillips head wood screws after several attempts on several screws.
Unscrewed October 9, 2008
1 out of 1 found this review helpful
Alden Grabit Broken Bolt and Damaged Screw Exractors, 4-Piece Set
Pros-Does what it says. good price.
Cons- Doesn't always drill the hole for the extractor. mostly I think
that due to the lack of surface for the bit to grab. Wish there were more sizes.
Saved money September 20, 2008
It looked like I was going to have to replace the plastic refrigerator roof vent cover on my camper. While resealing seams on the campers roof I discovered the vent cover could not be removed because the head of one of the recessed screws securing the vent was so corroded the metal was crumbling. I thought I would have to break the vent to remove it then replace the mounting plate and vent cover - cost about $75. A contractor friend suggested I try Grabit. At first I had difficulty. The side of the bit which the directions say will burnish and make a recess in the screw head didn't do the job. So, I sank a small pilot hole with a standard drill bit and then used the removal side of the Grabit bit. It worked the first time. Now all I need is to replace the screws not the vent.
 Better than expected September 8, 2008
1 out of 1 found this review helpful
I used this product to remove old storm windows with layers of paint on the screws. When I first received it I was leery since it is made in China. I thought it would not stand up after the first couple of screws. To my amazement it allowed me to remove about 44 screws. If you are interested in removing only the heads of screws, use a bigger size than recommended and you can do the job in one step without having to flip the bit over. Good luck on your project.
|
|
|
The Outpost Network | |
